Analyzing Motion Control System

Nov 06, 2024 Leave a message

Motion control is one of the core areas of industrial control and plays a huge role in industrial scenarios such as printing, packaging and assembly. Motion control originated from motor control, the task of motor control is to control individual motor torque, speed, position and other parameters, so that the motor to complete the specified action. And motion control is realized on the basis of motor control to multiple motor control, motion control system automatically coordinates multiple motors to complete the specified movement. The application of complex precision motion control system in greatly reducing production costs at the same time also reduces the occurrence of misoperation in processing, improve product quality. Today's rapid development of industrial production automation technology, a variety of motion control systems are widely used in the logistics industry and large assembly lines.


Frequent appearance in our vision of the robotic arm is the motion control system to help industrial production of the most critical link, the world's most advanced robotic arm has seven gearless joints, each motor drive a joint movement. Mechanical arm normal operation, the motion control system coordinates seven motors at the same time, the arm can easily grasp any position in the space of the object. Not only that, it can also realize other complex functions, it even helps people to clean or play musical instruments.


A few years ago, the sweeping robot, which became a big hit on the Internet, was the epitome of motion control. When a sweeping robot sets up a route, the motion control system drives the motors to perform different actions so that the sweeping robot can complete its tasks efficiently. In factories, robotic arms are widely used in assembly lines, and in automobile manufacturing lines, robotic arms can easily lift dozens of kilograms or even hundreds of kilograms of parts to complete welding and assembly. We can see that the motion control system is not only used in industry, it is not difficult to find them in the life closest to us.


To understand the motion control system, you need to focus on understanding is the executor of the motion command - motor. Most of the motors used in motion control systems for stepper motors and servo motors, the following editorial briefly introduces two kinds of motors for you.


1 Stepper motor
Stepper motor can be the input pulse signal into an angular displacement, in the normal operation of the stepper motor, the motor speed, position, acceleration and deceleration depends only on the frequency and number of pulse signals, and is not subject to load changes. When a stepper motor driver receives a pulse signal, it drives the stepper motor to rotate a fixed angle in the set direction. It is called a "step angle" and it rotates step by step, one step angle per step, hence the name stepper motor.


2 Servomotor
The servo motor converts the electrical signal it receives into an angular displacement output on the motor shaft. The servo motor driver controls the three-phase electricity to form an electromagnetic field, and the rotor rotates under the action of the magnetic field. The encoder that comes with the servo motor feeds back signals to the driver, which compares the feedback value with the target value and adjusts the angle of rotation of the rotor.


Comparison of the two motors


1 Control mode is different
Stepper motor using open-loop control, servo motor using closed-loop control, the difference between the two control methods is that the closed-loop control will compare the target value and the actual value, adjust the position of the motor, compared with the servo motor control accuracy is better than the stepper motor.


2 control precision is different
The more phases of the stepper motor, the higher its accuracy. 2-phase motor cost is low, but in the low-speed vibration, high-speed torque drop fast, 5-phase motor is less vibration, high-speed performance is good, than the 2-phase motor speed 30 ~ 50%, and can even replace the servo motor in some occasions. Servo motor comes with encoder, the more the encoder scale, the higher the precision. In general, the servo motor accuracy is equivalent to the step angle of 0.036 degrees of the stepper motor, of course, there is no such a small step angle of the stepper motor, the general stepper motor step angle of 1.8, the above is just an analogy, it can be seen in the realization of high-precision motion control, servo motors are far beyond the performance of stepper motors.


3 Low frequency characteristics are different
Unlike servo motors, although at low speeds, stepper motors will use damping technology or subdivision technology to overcome the phenomenon of low-speed vibration. Stepping motor in low speed is still very easy to vibration phenomenon, while the servo motor whether in high speed or low speed will not vibrate phenomenon.


4 Movement performance is different

Stepping motor for open-loop control, start frequency is too high or load is too large easily caused by the phenomenon of lost step, stopping too high speed is easy to overshoot the phenomenon of servo motors for closed-loop control, servo drive can be directly on the motor encoder feedback signals sampling, the internal composition of the speed loop and the position loop, generally will not lose step or overshoot the phenomenon.


5 speed accordingly different
Stepper motor accelerates from standstill to the working speed requires hundreds of milliseconds, while the servo motor generally requires only a few milliseconds, can be used for the requirements of rapid start-stop control occasions.


From the above comparison, servo motors in many performance aspects are better than stepper motors, that is not our selection of motor models when all the selection of servo motors on the line? Not so, the servo motor price will be much higher than the stepper motor, stepper motor will be in the cost-effective aspects of the servo motor, after mastering the characteristics of the two motors, according to the different needs, choose the right type of motor is particularly important.
Motion control system is not just composed of motors and drives, compared to them is more important to control, coordinate the movement of multiple motor control scheme or algorithm. For example, there is such a motion system, driven by two motors on the turntable is full of film, in order to achieve the film can not be broken in the case of a set film winding speed, from a turntable and then rewind to another turntable. In the process of film winding, the two turntable roll diameter will continue to change, in order to ensure that the film does not break and in line with the specified film winding speed, the need to constantly adjust the speed of the two motors, which requires the use of PID algorithms to do closed-loop control, so that the controlled object: the feedback value of the tension affects the speed of the motor. In this way, relying on the fast response performance of the servo motor, when the tension is too large to reduce the speed, when the tension is too small to speed up the speed. Under constant adjustment, the tension and winding speed of the film reaches the requirement.
In addition to the PID algorithm, in the 6 degrees of freedom or even 7 degrees of freedom of the robotic arm control system will also be used to ensure that the differential motion algorithm arm running to the specified position. A good motion control system solution determines whether the system is safe, reliable and efficient. Having a good program design ability will make us more competitive as well.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry