Maintenance of the hydraulic system of the hydraulic station

Sep 23, 2024 Leave a message

Strengthen the hydraulic system equipment maintenance is to ensure that the normal operation of the equipment is a very important part. At present, hydraulic equipment often appear the following four kinds of failure:

 

First, the hydraulic system works well sometimes bad, the actuator action sometimes;

 

Second, the hydraulic system leakage is serious;

 

Third, the actuator movement with jumping, vibration or crawling;

 

Fourth, the hydraulic system working fluid temperature rise is too high.

 

If the above four conditions are analyzed and diagnosed to find the root cause of the disease, while the scientific management of hydraulic equipment, common failures proposed preventive measures, hydraulic system failure can be reduced or avoided. Maintenance of hydraulic equipment should pay attention to the following points.

 

1, the control of hydraulic system leakage is extremely important, because the leakage and vacuum is a common failure of the hydraulic system. To control leakage, the first is to improve the processing accuracy of hydraulic components and components of the assembly quality and piping system installation quality; second is to improve the quality of seals, pay attention to the use of seals and regular replacement of the installation; and finally, to strengthen routine maintenance.

 

2, to prevent the hydraulic system vibration and noise. Vibration affects the performance of hydraulic components, it makes the screws loose, pipe joints loose, thus causing oil leakage, and even make the oil pipe rupture. Once the screw breaks and other faults, and will cause personal and equipment accidents. Therefore, to prevent and eliminate the vibration phenomenon.

 

3, control oil pollution, keep the oil clean, is to ensure that the normal operation of the hydraulic system is an important measure. At present, due to serious oil pollution, resulting in frequent hydraulic failures. According to statistics, 70% -80% of the failure of the hydraulic system is caused by oil pollution. Fluid pollution also accelerates the wear and tear of hydraulic components.

 

4, control the temperature rise of the working fluid in the hydraulic system is to reduce energy consumption and improve system efficiency is an important part. A machine tool hydraulic system, if the fluid temperature changes in a wide range of consequences:

 

a. Affect the hydraulic pump's oil suction capacity and volumetric efficiency;

b. The system does not work properly, pressure, speed instability, unreliable action;

c. Increase in internal and external leakage of hydraulic components;

d. Accelerate the oxidative deterioration of the fluid.

 

5, strict implementation of regular tightening, cleaning, filtering and replacement system. Hydraulic equipment in the work process, due to shock vibration, wear and tear, pollution and other factors, so that the pipe loosening, metal parts and seals wear, so it must be hydraulic components and tanks, etc., the implementation of regular cleaning and maintenance, the fluid, seals, the implementation of the extension of the replacement system.

 

6, the strict implementation of the daily inspection and calibration system. Inspection and calibration is one of the basis of equipment maintenance work. Hydraulic system failure there is hidden, variable and difficult to determine the three major difficulties. Therefore, the working condition of the hydraulic system for point inspection and fixed inspection, the possible failure of the phenomenon recorded in the daily inspection and maintenance of the card, and will nip the failure in the bud, reducing the occurrence of major accidents, but also for equipment maintenance to provide first-hand information.

 

7, strict process discipline. In the high degree of automation of mass production of modern machining plants, machinery and equipment, high degree of specialized production, production of a strong beat, in accordance with the processing requirements and production beat to regulate the pressure and flow of the hydraulic system to prevent the operator in order to speed up the beat, and the hydraulic system pressure and speed up the phenomenon of accelerated movement. Unreasonable regulation not only increase power consumption, oil temperature rise, and will lead to hydraulic system failure.

 

8, the establishment of hydraulic component repair test site. In order to ensure that the repaired hydraulic components to meet the original technical performance requirements, or the inventory of hydraulic components for quality sampling, or imported hydraulic components in the mapping test production before the performance test, etc., all need to have a repair test site.

 

9, the establishment of hydraulic equipment (hydraulic cylinders, hydraulic stations) technical files. Equipment technology file is "good management, good use, repair" the technical basis of equipment, spare parts management, equipment maintenance and technical transformation of the original basis. So seriously establish the hydraulic equipment technology file will help analyze and determine the cause of hydraulic failure, and to take decisive measures to eliminate the failure to provide a basis.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry