I. INTRODUCTION
In industrial automation and process control, PID (Proportional-Integral-Differential) control is a widely used control strategy.PID control has become one of the most widely used control systems with mature technology by virtue of its simple principle, strong robustness and wide range of practicality. This paper will introduce the principle of PID control, its role and its application in industrial automation in detail, aiming to provide readers with a comprehensive and in-depth understanding.
II. Principle of PID control
PID control is a feedback-based control algorithm, its working principle is based on the deviation between the input (given value) and output (actual value) of the system, through the proportional (P), integral (I) and differential (D) three links to the operation, so as to derive the control amount to control the controlled object. The following describes each of the three links of PID control:
Proportional link (P)
Proportional link is the most basic link in PID control, its role is to directly calculate the control quantity according to the size of the deviation. The larger the deviation, the larger the control quantity, and vice versa. The output of the proportional link is proportional to the deviation, and therefore has a faster response speed. However, purely proportional control is subject to steady state error, i.e., after the system reaches a steady state, there is still a deviation between the output value and the given value.
Integral link (I)
The function of the integral link is to eliminate the steady state error. It accumulates the past deviations by performing an integral operation on the deviation, thus obtaining a control quantity related to the duration of the deviation. When there is a steady state error in the system, the integral link accumulates the deviation until the output value reaches a given value, thus eliminating the steady state error. However, the integral link introduces phase lag and reduces the response speed of the system.
Differential link (D)
The function of the differential link is to predict the trend of the deviation and give the control quantity in advance to suppress the deviation. It obtains a control quantity related to the rate of change of the deviation by performing a differentiation operation on the deviation. When the deviation is about to increase, the differential link will give a negative control quantity in advance, so as to inhibit the increase of deviation; when the deviation is about to decrease, the differential link will give a positive control quantity in advance, so as to accelerate the decrease of deviation. The differential link can improve the response speed and stability of the system.
The output of the PID controller is a linear combination of the outputs of the proportional, integral and differential links. By adjusting the parameters of the three links (proportionality coefficient Kp, integral time constant Ti and differential time constant Td), you can change the performance of the PID controller to adapt to different controlled objects and control requirements.
III. The role of PID control
PID control plays a vital role in industrial automation, mainly reflected in the following aspects:
Precise control
PID control can be based on the deviation between the input and output of the system, through the proportional, integral and differential three links for the operation, so as to derive a precise control amount to control the controlled object. This precise control can meet the requirements of high precision, high efficiency and high reliability in industrial automation.
Fast Response
The proportional and differential components of PID control have a fast response time, which allows them to quickly adjust the control quantity in response to changes in the system. This gives PID control a fast dynamic response, which can quickly stabilize the system and reach a given value.
Good stability
The integral link in PID control can eliminate the steady state error, so that there is no deviation between the output value and the given value after the system reaches a steady state. At the same time, the differential link can predict the trend of the deviation and give the control quantity in advance to inhibit the generation of deviation, so as to improve the stability of the system.
Strong flexibility
PID control can flexibly adjust the parameters according to different controlled objects and control requirements. By changing the values of the proportionality coefficient Kp, integral time constant Ti and differential time constant Td, the performance of the PID controller can be changed to adapt to different application scenarios. This flexibility makes PID control widely applicable in practical applications.
IV. Application of PID control in industrial automation
PID control has a wide range of applications in the field of industrial automation, including but not limited to the following aspects:
Temperature control: in the chemical, pharmaceutical, food and other industries need to accurately control the temperature to ensure product quality and production safety, PID controller can be based on the temperature sensor to collect the temperature signal and the deviation between the given value of the operation and output control to control the heating or refrigeration equipment in order to achieve precise control of the temperature.
Pressure control: in the oil, gas, water treatment and other industries need to pipeline or container pressure to ensure the safe operation of the system, PID controller can be adjusted through the output of the valve or pump to achieve precise control of the pipeline or container pressure.
Flow control: in the field of water supply, gas supply, sewage treatment and other areas need to accurately control the flow of liquids or gases to ensure the normal operation of the system, PID controllers can be adjusted through the opening of pumps or valves to achieve accurate control of the flow of liquids or gases.
In addition, PID control is also widely used in robotics control, aerospace, power systems, transportation control and other fields for industrial automation to provide strong technical support and protection.
V. Summary
PID control as a classical control algorithm plays a vital role in industrial automation and process control. It is through the proportional, integral and differential three links for the operation of the precise control amount to control the controlled object to realize the precise control of the system, fast response and good stability and other characteristics. At the same time, PID control also has a strong flexibility and adaptability can be based on different controlled objects and control requirements to flexibly adjust the parameters to adapt to different application scenarios. With the continuous development and progress of industrial automation technology PID control will continue to play an important role in the future for the development of industrial automation to make greater contributions.




