Opto-isolator, or optical coupler, abbreviated as OC, also known as optical coupler, optical isolator or opto-isolator, abbreviated as opto-coupler, is a kind of important electronic components, which is widely used in many fields such as communication, industrial control, medical equipment and so on. In this article, we will introduce the technical principle, classification, main parameters and application examples of photocoupling components, to provide readers with a comprehensive and in-depth understanding.
I. The technical principle of photoelectric coupling element
Photocoupling element is to use light as a media to transmit electrical signals to a group of devices, its core function is to maintain the usual electrical signal input, output has a good isolation between the role of the need to make the electrical signal through the isolation layer of the transmission method. Optocoupler is generally composed of three parts: light emission, light reception and signal amplification.
Light emission: the input electrical signal drives the light emitting source to emit light. A common light-emitting source is the infrared light-emitting diode (LED), which converts electrical energy into light of a specific wavelength.
Reception of light: It is received by a photodetector and generates a photocurrent. Between the emitting source and the receiver there will be closed optical channel (also known as dielectric channel), the receiver is a light sensor, sensing a specific wavelength of light, may be directly converted into electrical energy, may also be modulated by this signal to the current provided by an external power supply. Common receivers are photoresistors, photodiodes, phototransistors, silicon controlled rectifiers (SCR) or TRIACs.
Signal amplification: photocurrent is then further amplified after the output, thus completing the electrical - optical - electrical conversion, play the role of input, output, isolation.
As the optocoupler input and output are isolated from each other, it has good electrical insulation and anti-interference ability. At the same time, the input of the optocoupler belongs to the current-type work of the low-resistance components, has a strong common mode rejection capability. Therefore, it is in the long line transmission information as a terminal isolation element can greatly improve the signal-to-noise ratio, in the computer digital communication and instant control as a signal isolation interface device, can greatly increase the reliability of its work.
II. Optical coupling components of the classification
Photocoupling element can be divided into analog and digital two kinds, are composed of light transmitter and light detector. Common photoelectric coupling element is a light-emitting diode (LED) and phototransistor (or other types of photosensitive components) in an opaque package. According to different classification criteria, photocoupling elements can be further subdivided:
According to the optical path: can be divided into external optical path photocoupler (also known as photoelectric intermittent detector) and internal optical path photocoupler.
Outer optical path photocoupler: the optical path is partially exposed to the external environment, applicable to the need for a larger optical range or special optical path occasions.
Internal optical path photocoupler: the optical path is partially encapsulated inside the device, compact structure, suitable for occasions that do not require high optical path.
According to the output type: can be divided into analog photocoupler and digital photocoupler.
Analog optocoupler: the output signal is a continuously changing analog quantity, suitable for the transmission and isolation of analog signals.
Digital optocoupler: the output signal is discrete digital quantity, suitable for digital signal transmission and isolation.
According to the package form: can be divided into DIP (double in-line), SOP (small outline package), SMD (surface mount device) and so on.
DIP package: suitable for insertion on traditional PCB boards.
SOP and SMD packages: for modern high-density PCB board mounting.
III. The main parameters of the optoelectronic coupling components
Photoelectric coupling components of the performance parameters of its application has an important impact on the effect, the following are several key parameters:
Reverse current IR: the current flowing in the diode when the specified reverse operating voltage VR is added to both ends of the tube under test.
Reverse breakdown voltage VBR: the voltage drop between the poles when the reverse current IR passed by the tube under test is a specified value.
Forward voltage drop VF: The voltage drop between the positive and negative terminals when the forward current through the diode is a specified value.
Forward current IF: The current flowing in the diode when a certain forward voltage is applied to both ends of the tube under test.
Current Transfer Ratio CTR: When the operating voltage of the output tube is a specified value, the ratio of the output current and the forward current of the light-emitting diode is the current transfer ratio CTR. CTR is an important indicator of the transmission efficiency of the optocoupler.
Pulse rise time tr and fall time tf: the optocoupler in the specified operating conditions, the light-emitting diode input specified current IFP pulse wave, the output tube is output corresponding pulse wave. From 10% to 90% of the amplitude of the output pulse front edge, the time required for the pulse rise time tr; from 90% to 10% of the amplitude of the output pulse back edge, the time required for the pulse fall time tf. These two parameters reflect the response speed of the optocoupler.
Isolation voltage Vio: the value of insulation withstand voltage between the input and output of the optocoupler. It reflects the electrical isolation capability of the optocoupler.
Isolation capacitance Cio and isolation resistance Rio: the capacitance value and insulation resistance value between the input and output terminals of the optocoupler, respectively. They have an important influence on the anti-interference ability and stability of the optocoupler.
IV. Application examples of photocoupling elements
Optocoupling components are widely used in many fields due to their unique electrical isolation and signal transmission characteristics. The following are a few typical application examples:
Optical communication industry: In the field of optical communication, photocoupler, as the key link of signal conversion and isolation, effectively guarantees the stable transmission and efficient processing of communication signals. With the popularization of 5G technology and the sharp rise in the demand for data transmission rate and capacity, the role of optocouplers has become more prominent.
Internet of Things (IoT): In the data interaction between IoT terminal equipment and cloud platform, opto-couplers provide reliable electrical isolation and signal transmission, which guarantees the stable operation of the IoT system.
Industrial automation: In industrial automation control systems, optocouplers are widely used in PLCs (programmable logic controllers), sensors, actuators, and other key equipment due to their high reliability and strong anti-interference capability. By realizing electrical isolation between circuits, opto-couplers effectively prevent the interference of the complex electromagnetic environment on the control signals in the industrial field, ensuring the stable operation of the automation control system.
Consumer electronics: In portable devices such as smartphones, tablet PCs, wearable devices, opto-couplers play a key role in power management, signal transmission and other aspects. They not only improve the performance and stability of the devices, but also reduce power consumption and electromagnetic interference.
New Energy Vehicles: In the field of new energy vehicles, optocouplers are increasingly being used as a key application in battery management systems (BMS) and motor control systems. They improve vehicle safety and energy efficiency and contribute to the continued advancement of new energy vehicle technology.
Medical devices and biotechnology: In medical devices, optocouplers realize electrical isolation, effectively reducing the risk of electric shocks to patients due to equipment failure. Meanwhile, in the field of biotechnology, optocouplers can accurately detect biological signals by virtue of their high sensitivity, providing strong technical support for life science research, medical diagnosis and treatment.
V. Conclusion and Prospect
As an important electronic component, opto-coupler components play an irreplaceable role in many fields such as communication, industrial control, medical equipment and so on. With the continuous progress of technology and the continuous expansion of application requirements, the performance and types of optoelectronic coupling elements are also improving and enriching. In the future, photoelectric coupling components will move towards the direction of higher speed, higher reliability, lower power consumption and smaller packages to meet the requirements of modern electronic systems for high performance, high density and high reliability. At the same time, the integration and fusion of photoelectric coupling components with other electronic components will also become an important trend of future development, providing more possibilities for the innovation and upgrading of electronic systems.




