What is the working principle of a voltage regulator?
The voltage at the input is kept constant and then a portion of the voltage is taken out of the input coil as the output. When the number of turns of this coil is changed due to the movement of the sliding arm over the input coil, the output voltage is changed, thus regulating the output.
When we are using a voltage regulator, there are two points worth noting. First, the common terminal of the high voltage apparatus must be zero line, otherwise it will easily lead to electric shock accident; Second, the voltage regulator does not make electric isolation, it must be used with caution and must have professional knowledge.
Regulators are mainly used in what areas?
1, electric furnace industry: annealing furnace, drying furnace, quenching furnace, sintering furnace, crucible furnace, tunnel furnace, furnace, box-type furnace, pit-type furnace, melting furnace, rolling furnace, vacuum furnace, cart furnace, quenching furnace, aging furnace, hooded furnace, atmosphere furnace, oven experimental furnace, heat treatment, resistance furnace, vacuum furnace, mesh belt furnace, high-temperature furnaces, kilns, electric furnaces.
2, machinery and equipment: packaging machinery, injection molding machinery, heat shrinkage machinery, extrusion machinery, food machinery, tempering equipment, plastic processing, infrared heating.
3,Glass industry: glass fiber, glass molding, glass melting, glass printing, float glass production line, annealing tank.
4,Automotive industry: spray drying, thermoforming.
5,Energy-saving lighting: tunnel lighting, street lighting, photography lighting, stage lighting.
6,Chemical industry: distillation and evaporation, preheating system, pipeline heating, petrochemical, temperature compensation
7,Other industries: salt bath furnace, industrial frequency induction furnace, quenching furnace temperature control, heat treatment furnace temperature control, diamond press heating, high-power magnetization / demagnetization equipment.
What are the characteristics of autotuning regulator?
1, consume less material, low cost. Because the amount of silicon steel sheet and copper wire used in the transformer is related to the rated induced potential and rated current of the winding, that is, and the capacity of the winding, the autotransformer winding capacity is reduced, the material consumed is also reduced, the cost is also low.
2, easy transportation and installation. Because it is lighter than the same capacity of double winding transformer, small size, small footprint.
3, less loss and high efficiency. Because of the copper wire and silicon steel sheet dosage reduction, in the same current density and magnetic flux density, autotransformer copper loss and iron loss than double winding transformer reduce, so the benefit is higher.
4, improve the limit manufacturing capacity of the transformer. Transformer limit manufacturing capacity is generally subject to the limitations of transportation conditions, in the same transportation conditions of the limitations of the same transportation conditions, the autotransformer capacity can be larger than the double winding transformer manufacturing.
What is the role of voltage regulator?
As the name implies, it is to regulate the voltage, also known as voltage regulator, generally used in scientific research, experiments, testing, heating insulation, soft start and other occasions. Provide different voltages to the load, and the voltage can be linearly adjusted in the case of energized.
Small regulators are contact, capacity is generally below 30KVA, single-phase 220V input, 0-250V output; three-phase 380V input, 0-420 output.
Large regulator types are more, capacity, specifications, can be designed and produced according to customer requirements.
Usually the most common voltage regulator is a kind of regulator, so we also call automatic regulator.
What are the types of regulators?
Contact regulator - capacity is generally 30KVA or less, dry, scientific research institutions and household and other more common, specifications: single-phase 220V/0-250, three-phase 380V/0-430V.
Induction regulator - large capacity, low price, the largest domestic 8000KVA, the vast majority of oil-immersed, wide range of use, no contact, only simple maintenance, there is a certain waveform distortion, short-circuit impedance is larger, overload capacity in general, the following 10KV voltage level, common specifications: 380V/0-430V 380V/0-650V and the corresponding voltage ratio, other voltage ranges may increase the cost due to additional transformers.
Column regulator - large capacity, high price, dry and oil-immersed are common, wide range of use, almost no waveform distortion, short-circuit impedance is small, overload capacity is better, the starting voltage can be done really 0V, with a roller brush contact adjustment, need regular maintenance and repair, the following voltage levels below 10KV, any voltage below 10KV range, fully customized.
Magnetic regulator - higher prices, DC control, oil-immersed and dry are common, oil-immersed generally below 1000KVA, no-load voltage regulation range is small, suitable for frequent short circuit impact occasions.
Thyristor AC regulator - small size, light weight, dry type is the main, there are water-cooled, single-phase maximum capacity of 304KVA, three-phase maximum capacity of 528KVA, common specifications: 220V/0-216V, 380V/0-372V, 380V/0-327V, due to the waveform distortion is large. Limit the scope of use.
What should be noted about the use of autotransformer?
Wait for the motor to start, and then disengage the motor from the autotransformer, so that it can move normally under full voltage. With autotransformer step-down starting, the starting current and starting torque of the motor are reduced proportionally to the square of its terminal voltage, and a larger starting torque can be obtained with the same starting current.
Autotransformer step-down starting circuit can not be operated frequently, if the start is not successful, the second start should be more than a few minutes interval, two consecutive starts, should be at least half an hour after the start again, this is to prevent the autotransformer winding start current is too large and heat damage to the insulation of the autotransformer.
What is the difference between a voltage regulator and a voltage stabilizer?
Voltage regulator can control the change of unstable voltage within a certain voltage range, to protect the home appliances from being burned out.
Voltage regulator is a certain volt of voltage (such as AC voltage 220V) into the voltage required by the appliances, each appliance should be a regulator, such as the power supply in the computer, the 220V will be modulated into a few volts or more than a dozen volts to supply the motherboard or hard disk. A good power supply will also have a voltage regulator to prevent the voltage from varying too much and burning out the computer.
Why does the voltage regulator burn out?
1. Too many electrical appliances in the circuit, the load is too large, resulting in the regulator burned out when overloaded; this time you need to turn off unnecessary electrical appliances, reduce the load on the circuit, reduce the pressure to the regulator.
2. regulator is short-circuited, this time you need to carefully check the regulator's working line, remove the short-circuit fault.
3. Add in the regulator on the voltage is too large, resulting in regulator internal current is too high, resulting in burning; this time you need to carefully check the rated voltage of the regulator, the regulator connected to its rated voltage work can be.




