Industrial connectors are electromechanical components used to connect wires, cables, and control boards of industrial equipment. With the continuous development of the manufacturing industry, the market demand for industrial connectors show high growth trend, how can we ensure that industrial connectors can give full play to their role in the equipment? One of the main points is to be plugged in the operation must be operated in accordance with the prescribed process, try to avoid human failure.
(1) industrial connectors before plugging, should confirm that the plug to be plugged with the socket code, interface shape, interface positioning keyway, positioning color coding, locking nails and slots, positioning screws and holes and other aids to the positioning design of the same, to avoid wrong plug.
(2) Industrial connectors should be pushed or screwed into the process, the plug and socket should be aligned with the docking surface parallel to the cable or wire, and then along the axis of the direction of the locking sleeve gently pushed or slowly screwed into place and locking. If you find the two docking surface skewed, positioning is not allowed, feel tighter than the normal force or obstruction and other abnormal sensations, you should stop the operation, along the axis of the direction of the outward pull away from the state of the inspection, in the event of trouble-shooting, and then re-insertion. To avoid damage to the connector, you can use a special auxiliary tool for insertion and removal.
(3) When tightening the tailcover of the plug or socket, the tailcover outlet cable or wire cannot be rotated with it. When blind plugging, it is recommended to use light and visual function equipment (such as miniature camera or endoscope and monitor, etc.) to monitor the blind plugging process. When blind plugging is performed without light and monitoring equipment, the corresponding characteristics of the interface to be plugged in should be clearly felt with the fingers, and then plugged in place and locked.
(4) In the locking operation, where it occurs or found that can not be locked properly, should be pulled out in a timely manner after checking, checking the correct and then in accordance with the provisions of the plugging and locking. For the power connector of the thick hard cable, the cable should be fixed to prevent the cable from overweight resulting in the power connector can not be pulled out and damage. Power connector plugging and locking, should keep its tailcover outlet cable into a natural extension state, the beginning of the cable bending should generally leave the tailcover outlet more than 30mm. When bending, the inner bending radius of the cable should be not less than 4 times the outer diameter of the cable. When plugging and unplugging the power connector, it should be plugged and unplugged by holding its body, and should not be operated by directly grasping the cable or wire.