Industrial robot motor control methods

Oct 12, 2024 Leave a message

Industrial robots are mainly composed of several parts, including mechanical structure part, circuit hardware part, and embedded software part. For designers who want to realize high-precision and complex movement of robots, the difficulty is mainly in the motor control of circuit hardware part, so we need to repeatedly study the robot's movement and its behavioral trajectory, adopt corresponding motor control methods according to the functions of different robots, and optimize software control algorithm, so as to realize high-precision complex movement.
 

1. open-loop control and closed-loop control:


As an example, shooting a basketball, the basketball out of the hand can not continue to control it, regardless of whether the ball into or not, the ball out of the moment of control activities that end. This is open-loop control.


Closed-loop control: home water dispenser or more advanced electric kettle, it does not need you to manage, the water is open, automatic power off; water, automatically turn on the power for heating. When the temperature exceeds the set temperature, the heating function is automatically turned off, when the temperature is lower than the set temperature, and restart heating. It is such a repeated cycle to have a constant temperature. In the outside world, that is, from the beginning of boiling water to the final insulation, the system automatically maintains a constant temperature. This is what we call closed-loop control.


2. the open-loop control of the motor:


Motor if you want to rotate, first with two elements, power supply circuit and microcontroller control circuit, the power supply can be externally supplied, the control circuit needs to utilize the microcontroller to control the motor drive circuit, the motor drive circuit to drive the motor. As long as there is a power supply and control circuit, the motor will be able to rotate and change speed normally.


Open-loop control of the motor is a system control method where only the microcontroller control circuit and no feedback information is available. We will supply power to the whole circuit, the microcontroller outputs a certain duty cycle, which is input to the motor driver, and the motor driver drives the motor, and this way can make the motor rotate, we can control the motor's forward and reverse rotations and the size of the rotational speed through the microcontroller, but it will not monitor the motor's working status, and when the motor's rotational speed is out of tune, the system can no longer regulate it, and when the motor is blocking the rotational jamming, the system is also When the motor is blocked and stuck, the system can not know it and thus can not take protective measures. Therefore, the motor control system designed using open-loop control, control timing is very important, once the error, the motor will burn, the entire system circuit is completely paralyzed, if a larger project, will produce irreparable losses, so the application in practice is very little.
 

3. Closed-loop control mode of the motor:


The closed-loop control of the motor means that on the basis of the open-loop control circuit, a feedback circuit is added so that the state of the motor can be adjusted to a steady state. The motor control circuit is the same as the open-loop control circuit, the feedback circuit can be added on the rotary shaft of the motor rotary encoder, rotary encoder signal through the signal shaping circuit and signal filtering circuit to get a stable signal, the micro-controller can read the rotary encoder after processing the data can be aware of the current speed of the motor, when the motor's actual speed is more than the value that we have set, we can reduce the output duty cycle of the micro-controller to reduce the motor speed. When the actual speed of the motor exceeds the value we set, we can reduce the output duty cycle of the microcontroller to reduce the speed of the motor, when the actual speed is less than the set speed value, we can increase the speed of the motor by adjusting the output duty cycle of the microcontroller. In addition, by collecting the voltage value and current value when the motor is rotating, we can know whether the current motor is in the state of over-current or over-voltage, so as to make a better judgment on the current state of the motor, and when there is a blocking and other faults, we can quickly shut down the motor for protection. This way can ensure that the motor works reliably, and is more widely used in practice.


4. double closed-loop control of the motor:


On the basis of the previous closed-loop control of the motor, after the motor deceleration device plus the angle sensor, you can realize the double closed-loop control, this control mode is to ensure the real-time synchronous rotation of the dual motor or multiple motors. To realize the real-time synchronous rotation function of multiple motors, each motor needs to be installed with an angle sensor, so that the microcontroller can not only read the data processed by the rotary encoder to achieve stable rotation, making the motor work in a stable and reliable state, but also read the signals processed by the angle sensor to know the real-time position of each motor, which constitutes the second level of feedback circuit, forming a motor This constitutes a secondary feedback circuit, forming a double closed-loop control of the motor. When the rotation angle of the two motors or multiple motors of the stable rotation deviation, the angle deviation value can be processed, so as to carry out algorithmic correction and adjust the output duty cycle of the microcontroller, thus realizing the real-time synchronous rotation function of the two motors or multiple motors. In practice, the microcontroller reads the angle sensor data only to meet the single circle can collect 20 points, once the angle deviation exceeds the fixed threshold, you can quickly adjust the state.


5. summarize:


Relative to the traditional artificial mode, industrial robots is a shift in thinking, the role of industrial robots in our future life will be more and more, the control algorithm will be more and more fine, in order to ensure the healthy development of the field of industrial control, in the control of industrial robots we should also continue to innovate, in terms of precision and algorithms continue to optimize the industrial robots to better serve our lives.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry