If you have done any research on different types of fixtures, then you may have come across the term EOAT. This means end-of-arm tool or end-effector. It essentially refers to any device at the end of a robot arm
.
A gripper is an end-effector. Other EAOTs can be cameras and welding tools.
The different types of grippers you will find in the collaborative robotics market are:
- Hand grippers with flexible fingers
- Claw or hook grippers
- Suction cup, vacuum or pneumatic grippers
- Hydraulic grippers
- Specific 3D printing grippers
- Inflatable bags and cushions
- Magnetic or electronic fixtures
Top Fixture Types to Use with Collaborative Robots
When it comes to choosing the right gripper for a process, it can seem like a daunting task. The most popular gripper types include finger grippers, vacuum grippers, and magnetic grippers.
Each type of gripper can be distinguished by the method of power and the control or dexterity of the gripper itself, and each is suitable for different tasks.
Vacuum Grippers
Vacuum grippers work by utilizing the difference between atmospheric pressure and vacuum. They enable the gripper to lift, grip and move objects.
Typically, the vacuum flow is generated by a micro-electromechanical pump or a compressed air-driven pump. You need to ensure that the vacuum flow is uninterrupted to ensure that the collaborative robot can safely grasp the objects it picks up.
The difference between an electromechanical pump and a compressed air-driven pump is that a compressed air-driven pump provides four to ten times the power of an electromechanical pump. This makes compressed air driven pumps a better choice if you need to lift heavy objects.
On the other hand, electromechanically driven vacuum grippers excel when the application requires a high degree of maneuverability and dexterity.
Vacuum grippers are versatile and can be used to automate a wide range of tasks. They are most commonly used in packaging and palletizing operations.
Another advantage of vacuum grippers is that they are typically less expensive than other types of grippers.
Disadvantages of vacuum grippers include increased operating costs, as they consume more power than other types of grippers and often require an external air supply to create a vacuum. However, electric vacuum grippers have their own built-in vacuum pump and can be seamlessly integrated with collaborative robots.
Pneumatic Grippers
Pneumatic grippers use a combination of compressed air and a piston to operate fingers or jaws. The most popular pneumatic grips are available in 2- and 3-finger configurations, but there are also models that resemble human hands.
These are one of the most versatile fixture tools and can perform a wide range of applications.
The advantages of using pneumatic grips are low cost and a wide range of clamping forces. They are ideal for operating in tight spaces and have fast response times.
The disadvantage is that pneumatic grippers are only suitable for handling a single type of part, so they may not be ideal if your facility produces a lot of low volume - high mix items. Another disadvantage is that this clamp type offers limited force and position control compared to other clamp types, and they require compressed air to function. The need for compressed air also means additional valves are required, which increases the cost of hardware integration and programming.
Hydraulic fixtures
This type of fixture is powered by hydraulic fluid. Hydraulic clamps will provide greater clamping force than similar designs that utilize pneumatic controls. This makes them ideal for heavy-duty applications.
One of the main advantages of hydraulic grippers is their excellent clamping force. The disadvantage is that they add complexity and require handling of oil, pumps and reservoirs. This can all lead to higher maintenance costs compared to other gripper types. These types of grippers can also be heavier, thus limiting the application and use of collaborative robots.
Motorized Grippers
Motorized grippers are a popular choice when collaborative robot applications require pick and place. These types of grippers do not provide the same level of clamping force compared to hydraulic grippers. However, they are better suited for applications that require high-speed twinning with light to medium gripping forces.
Motorized grippers are typically equipped with both two-jaw and three-jaw devices. Three-jaw configurations are often preferred for use on round or cylindrical objects, while two-jaws can be reassembled to fit any other type of application.
One of the most defining features of using motorized grippers for manufacturing automation is control. Most motorized grippers come with a built-in microprocessor that allows the user to change the clamping force, speed and opening size so that the same unit can be used for different products. This allows motorized fixtures to easily handle a variety of different part types. The introduction of more technology into these grippers also means that the "brain power" of these devices can accurately measure distances, thus providing a way to pick up components and measure them at the same time.
Electric grippers are ideal for collaborative robotics applications and can be seamlessly integrated with collaborative robot control systems.
One disadvantage of electric grippers is that, in general, they tend to provide less gripping force than pneumatic grippers. They can also be more expensive from a cost perspective.




