Choosing Between a Contactor or a Motor Starter
It's a question we hear a lot - "Is it a contactor or a motor starter?" The question is understandable because both contactors and starters control electric motors and many people use the terms interchangeably, which can lead to some confusion. The mechanical components of a starter and a contactor are the same. The coil, contacts, and interrupter ...... Both devices typically use a lower control voltage to electromagnetically pull the contacts together. So what's the difference? It's simple.
A contactor is really just a weed relay. It is simply a component of the starter, rated by voltage. A contactor applies voltage to the contactor coil to close the contacts and supply and interrupt power to the circuit.
A motor starter is just a contactor plus an overload relay rated for motor HP or amps. Without the overload relay, it is no longer a starter. It goes back to being just a contactor. A starter uses an overload relay to protect the motor from load surges by shutting it down to prevent it from overheating. The term "motor starter" usually refers to the complete assembly. This includes, but is not limited to, the enclosure, contactor, control transformer (if present), overload and fuse (if present).
Choosing Between a Contactor or a Motor Starter
Contactors and motor starters are NEMA or IEC rated.




