Wireless Communication Transmission Methods and Technical Principles

Aug 22, 2024 Leave a message

Wireless Communication Transmission Methods and Technical Principles

Wireless communication is a kind of communication method that utilizes the characteristics of electromagnetic wave signals propagating in free space to exchange information. Wireless communication technology itself has many advantages, lower cost, wireless communication technology does not have to establish physical lines, not to mention a large number of manpower to lay cables, and wireless communication technology is not subject to the limitations of the industrial environment, the ability to fight against changes in the environment is stronger, troubleshooting is also easier, compared to the traditional wired communication setup and maintenance, the maintenance of the wireless network can be completed through remote diagnosis, more convenient; Strong expandability, when the network needs to be expanded, wireless communication does not need to expand the wiring; flexibility, wireless network is not subject to restrictions such as environmental terrain, and in the event of changes in the use of the environment, the wireless network only needs to make very few adjustments to adapt to the requirements of the new environment.
Common wireless communication (data) transmission methods and technologies are categorized into two types: "short-distance wireless communication technology" and "long-distance wireless transmission technology".

 

Short-distance wireless communication technology

Short-distance wireless communication technology refers to the transmission of data between the two sides of the communication through radio waves, and the transmission distance is within a relatively short range, and its application range is very wide. In recent years, the short distance wireless communication standards that are more widely used and have better development prospects are: Zig-Bee, Bluetooth (Bluetooth), wireless broadband (Wi-Fi), ultra-wideband (UWB) and near field communication (NFC).

(1) Zig-Bee: Zig-Bee is a short-range, low-power wireless communication technology based on the IEEE802.15.4 standard. Zig-Bee is derived from the communication method of honeybee swarms, as honeybees (Bee) rely on flying and 'buzzing' (Zig) their wings to communicate with their their companions to determine information such as direction, location and distance of food sources, thus constituting the communication network of the swarm. It is characterized by its close distance, its usual transmission distance is 10-100m; low power consumption, in the low power consumption standby mode, 2 No. 5 dry batteries can support a terminal to work for 6-24 months, or even longer; its cost, Zig-Bee free protocol fee, chip price is cheap; low rate, through the Zig-Bee often work in the lower rate of 20-250kbps; short time delay, Zig- Bee's response speed is faster, etc. It is mainly applied in the fields of home and building control, industrial field automation control, agricultural information collection and control, public places information detection and control, intelligent labeling, etc. It can be embedded in various devices.

 

(2) Bluetooth: able to realize point-to-point or point-to-multipoint wireless data and sound transmission within a 10-meter radius, and its data transmission bandwidth can reach 1Mbps communication medium for the frequency of 2.402GHz to 2.480GHz between the electromagnetic wave. Bluetooth technology can be widely used in the local area network in all kinds of data and voice equipment, such as PC, dial-up network, laptop computers, printers, fax machines, digital cameras, cell phones and high-quality headphones, etc., to achieve all kinds of equipment to communicate with each other anytime, anywhere.
Bluetooth technology is widely used in wireless office environment, automotive industry, information appliances, medical equipment and school education and factory automation and other fields, Bluetooth currently exists in the main problem is the size of the chip and the price is high; anti-interference ability is weak.

(3) Wireless broadband (Wi-Fi): it is a wireless LAN access technology based on 802.11 protocol. (The outstanding advantage of (Wi-Fi) technology is that it has a wide LAN coverage, its coverage radius can be up to about 100 meters, compared with Bluetooth technology, (Wi-Fi) coverage is wider; transmission speed is very fast, its transmission speed can reach 11mbps (802.11b) or 54mbps (802.11.a), suitable for high-speed data transmission business; no need for No wiring, can not be restricted by wiring conditions, very suitable for mobile office users. Setting up 'hotspots' in densely populated places, such as train stations, bus stations, shopping malls, airports, libraries, campuses, etc., allows Internet access to the above places via high-speed lines. Users only need to support wireless network terminal equipment in the area, you can access the Internet at high speed; health and safety, with WiFi functionality of the product transmitting power of no more than 100 milliwatts, the actual transmitting power of about 60-70 milliwatts, compared with cell phones, handheld walkie-talkies and other communications equipment, WiFi products, the radiation is smaller.

 

(4) Ultra-wideband (UWB): UWB is a carrierless communication technology that uses narrow pulses of non-sinusoidal waves at the nanosecond to micro-microsecond level to transmit data, and its transmission distance is usually within 10M, and using a bandwidth of more than 1GHz, the communication speed can reach more than several hundred megabits/s. UWB operates in a frequency band that ranges from 3.1GHz to 10.6GHz, and the minimum operating bandwidth is 500MHz.
Its main features are: high transmission rate; low transmit power, low power consumption; strong confidentiality; UWB communication using time-tuned sequences, able to resist multipath fading; UWB requires very few RF and microwave devices, which can reduce the complexity of the system. Due to the high bandwidth occupied by the UWB system, the UWB system may interfere with other existing wireless communication systems.UWB is mainly used in high-resolution "small range" to penetrate walls "ground and other obstacles in the radar and imaging systems.
Such devices can be used to check for defects in concrete and asphalt structures in buildings, bridges, roads, etc., as well as to locate faults in underground cables and other pipelines, and for disease diagnosis. In addition, they are of great use in the fields of rescue, security prevention, firefighting and medical and medical image processing.
 

(5) NFC: NFC is a new near-field wireless communication technology, its operating frequency is 13.56MHz, developed from 13.56MHz radio frequency identification (RFID) technology, it is the same frequency used by the current popular contactless smart card ISO14443, which provides a convenient way of communication for all consumer electronic products.NFC uses the amplitude shift keying (ASK) modulation, its data transmission rate is generally 106kbit/s and 424kbit/s. The main advantages of NFC are: close distance, high bandwidth, low energy consumption, compatible with contactless smart card technology, which has a wide range of applications in the field of access control, public transportation, cell phone payment and so on.

The application context of NFC can be basically divided into the following five categories:
A contact-passing, mainly used in conference admission, transportation barrier, access control and event tickets;
B contact-confirmation/payment, which is mainly applied to cell phone wallets, mobile and public transportation payment;
C contact-connection, this application enables 2 NFC-enabled devices to realize point-to-point transmission of data;
D contact-browsing, which allows the user to learn about and use the functions and services that the system can provide through the NFC-enabled cell phone;
E download-contact, through the terminal equipment with NFC function, using GPRS/CDMA network to receive or download relevant information for access control or payment and other functions.

Long-range wireless transmission technology
Long-distance wireless transmission technology: At present, the wireless communication technology widely used in remote areas mainly includes GPRS/CDMA, digital transmission radio, spread spectrum microwave, wireless bridge and satellite communication, short-wave communication technology. It is mainly used in more remote or not suitable for laying lines in the region, such as: coal mines, the sea, pollution or more severe environmental areas.

(1) GPRS/CDMA wireless communication technology: GPRS (General Purpose Radio Packet Service) is a wireless packet switching technology based on GSM communication system developed and operated by China Mobile, and it is a technology between the second generation and the third generation, usually known as 2.5G, which is a wireless transmission method developed by utilizing the concept of "packet switching". Packet switching encapsulates data into a number of separate packets and transmits these packets one by one, in a form somewhat similar to sending a parcel, with the advantage that bandwidth is only taken up when there is data to be transmitted and is priced in terms of the amount of data, which effectively improves the utilization of the network. the GPRS network supports both circuit-type data and packet-switched data, which makes it easy to interconnect with the Internet, compared to the circuit-type data of the original GSM network. Compared with the circuit-switched data transmission method of the original GSM network, the packet-switched technology of GRRS has the advantages of real-time online "pay-per-use" high-speed transmission.


CDMA (which stands for Code Division Multiple Access) is a new wireless communication system operated by China Telecom based on code division technology and multiple access technology, and its principle is based on spread spectrum technology.

 

(2) Digital transmission radio communication: digital transmission radio is the abbreviation of digital wireless data transmission radio. It is the use of digital signal processing, digital modulation and demodulation, with forward error correction, equalization of soft judgment and other functions of a wireless data transmission radio. The working frequency of digital transmission radio mostly uses 220--240MHz or 400--470MHz frequency band, which has the advantages of digital and voice compatibility, good data transmission in real time, dedicated data transmission channel, one-time investment, no operation and use of the fee, applicable to harsh environments, good stability and so on. The effective coverage radius of digital radio is about tens of kilometers, which can cover a city or a certain area. The digital radio usually provides standard RS-232 data interface, which can be directly connected with computer, data collector, RTU, PLC, data terminal, GPS receiver, digital camera and so on. Has been widely used in various industries, in aerospace, railroad, electric power, petroleum, meteorology, seismic and other various industries have applications in remote control, telemetry, shaking the letter, remote sensing, and other SCADA areas have also made great progress and development.


(3) Spread Spectrum Microwave Communication: Spread Spectrum Communication, i.e., Extended Spectrum Communication Technology refers to a communication technology in which the bandwidth of the signal used for transmitting information is much larger than the bandwidth of the information itself. It was first used in military communications. The basic principle of transmission is that the transmitted information is modulated with a pseudo-random code sequence (spread-spectrum code), and the rate of the pseudo-random code is much larger than the rate of the transmitted information, which makes the bandwidth occupied by the transmitted signal much larger than the bandwidth required by the information itself to realize the spectrum expansion, and at the same time, the radio power spectral density emitted into the space is also greatly reduced. At the receiving end, the same spread spectrum code is used for demodulation and recovery of information data! Its main features are: excellent noise immunity; anti-jamming ability; anti-decay ability; anti-polygonal interference ability; easy to multimedia communication network; has good security communication capabilities; does not interfere with other systems of the same type, etc., while having a long transmission distance, wide coverage and other characteristics, especially suitable for field networking applications.

(4) wireless bridge: wireless bridge is a combination of wireless radio frequency technology and traditional wired bridge technology. Wireless bridge is designed for the use of wireless (microwave) for long-distance data transmission point-to-point interconnection. It is a store-and-forward device to realize LAN interconnection at the link layer, which can be used for long-distance (up to 50Km), high-speed (up to 100 megabits per second (Mbps)) wireless networking between fixed digital equipment and other fixed digital equipment. Spread spectrum microwave and wireless bridge technology can be used to transmit the bandwidth requirements are quite high for video surveillance and other large data signal transmission services.

(5) Satellite communication: Satellite communication refers to the use of artificial Earth satellites as relay stations to relay radio signals, thus realizing a technology of communication between multiple ground stations, which is the inheritance and development of terrestrial microwave communication. A satellite communication system usually consists of two parts, namely, the satellite end and the ground end. The satellite end is in the air, mainly used to amplify the signals sent by the ground station and then forward them to other ground stations. The ground station is mainly used for the control and tracking of satellites, as well as realizing the access of ground communication systems to satellite communication systems.

Satellites can be divided into synchronous satellites and non-synchronous satellites, synchronous satellites run in the air in the same direction and period as the direction and period of the Earth's rotation, and from any position on the ground, the satellites are stationary; non-synchronous satellites run in a period greater or less than the Earth's operating cycle, and their orbital altitude and inclination can be adjusted according to the needs of the shape of the "inclination".
The characteristics of satellite communication are: wide coverage, wide working frequency band, good communication quality, not limited by geographic conditions, and the cost has nothing to do with the communication distance, etc. It is mainly used in international communication and domestic communication. It is mainly used in international communications, domestic communications, military communications, mobile communications and radio and television broadcasting, etc. The main disadvantage of satellite communications is that the communication has a certain delay, for example, when playing satellite phone, you can not immediately hear each other back, the main reason is that the transmission distance of the satellite communications is longer, the transmission of radio waves in the air is a certain delay.
 

(6) Short-wave communications: According to the division of the International Radio Advisory Committee, short-wave refers to electromagnetic waves with a wavelength of 100m - 10m and a frequency of 3MHZ - 30MHZ. Short-wave communication refers to the use of short-wave radio communication, also known as high-frequency (HF) communication. Short-wave communication can be divided into ground-wave propagation and sky-wave propagation. The attenuation of ground wave propagation increases with the rise of the operating frequency, and under the same ground conditions, the higher the frequency, the greater the attenuation. The use of ground wave is only applicable to close-distance communication, and its operating frequency is generally selected below 5MHZ. Ground wave propagation is affected by the weather is small, relatively stable, channel parameters basically do not change with time, so the channel can be regarded as a constant reference channel. Sky wave propagation is the radio wave reflected by the ionosphere to carry out long-distance communication, tilted projection of electromagnetic waves reflected by the ionosphere, can be transmitted to the ground thousands of kilometers away. The propagation loss of skywaves is much smaller than that of ground waves, and after many reflections between the ground and the ionosphere, they can reach extremely far away places, so the use of skywaves can be used to carry out round-the-world communications. Skywave propagation is extremely unstable due to the serious effects of ionospheric changes and multipath propagation, and its channel parameters change drastically with time, so it is called a variable parameter channel. Short-wave communications are characterized by low construction and maintenance costs, short cycle time, simple equipment, easy circuit scheduling, strong resistance to destruction, narrow frequency bands, small communication capacity, and poor stability of signal transmission over sky-wave channels.

Send Inquiry

whatsapp

Phone

E-mail

Inquiry